User`s guide

32 • Driver Installation
4.2 LAN Drivers Installation
This chapter describes LAN driver installation for the onboard Ethernet
controller Intel 82559. The relative drivers are under the following ADLINK
CD directory: X:\CHIPDRV\LAN\100PDISK, where X: is the location of the
CD-ROM drive.
4.2.1 Software and Drivers Support
The 82559 drivers support the following OS or platforms:
• Windows 98, Windows 95, Windows 2000, Windows NT
• Novell Netware, DOS Setup for Novell NetWare DOS
• UNIX, OS2, Linux
All the above drivers are included in the ADLINK CD. In the following
section, we will describe the driver installation for Windows 98, Windows
2000, and Windows NT. For the driver installation of the other OS, please
refer the readme file inside the CD.
4.2.2 Driver Installation on Windows 2000
The Windows 2000 may install the LAN driver. We recommend you to
manually installed the most updated LAN driver, which shipped with ADLINK
CD to guarantee the compatibility. After installing the Windows 2000,
please update the new drivers by the following procedures.
1. Boot Windows 2000, Click Start. Select Settings then double-click
the Control Panel.
2. Double-click System icon, click Hardware tab, click Device
Manager button.
3. Double-click Network Adapters entry, Double-click the Intel 8255x-
based PCI Ethernet Adapter (10/100) entry.
4. Click Driver tab, then click Update Driver… button.
5. An Upgrade Device Driver Wizard windows, click Next>.
6. Select Display a list of ... and click Next>. The next window may
show a list of hardware models.