User`s guide

Driver Installation • 31
4.1.3 Driver Installation on Windows NT
The Windows NT may install the standard VGA driver while. We
recommend you to manually installed the most updated driver, which
shipped with ADLINK CD to guarantee the compatibility. After installing
Windows NT, please update the new drivers by the following procedures.
1. From the Control Panel, double-click the Display icon.
2. Click the Settings tab, click Display Type…, click Change…
button.
3. Insert ADLINK CD and click Have Disk.
4. Browse the SM721 driver in the following path:
X:\CHIPDRV\VGA\SM721\NT40, highlight smisetup.inf, click
OPEN. Click OK.
5. A windows shows the Display is Silicon Motion Lynx Family, click OK,
then click Yes to continue.
6. An Installing Driver window shows successful installing, click OK to
continue.
7. Click Close button.
8. Click Close button, then restart the computer to active the new driver.
Note: After installing the VGA/AGP drivers, you may find the driver
does not work. This may due to you do not install the NT
service pack in advance. We suggest installing the NT service
pack 4 or higher version to enable APG capability.