User`s guide

Driver Installation • 29
4.1 VGA Drivers Installation
This chapter describes VGA driver installation for the onboard VGA/LCD
controller SM721. The relative drivers are in the following ADLINK CD
directory: X:\CHIPDRV\VGA\SM721, where X: is the location of the
CD-ROM drive. The VGA drivers for Windows 98/95, Windows NT and
Windows 2000 are included.
4.1.1 Driver Installation on Windows 2000
The Windows 2000 may install the standard VGA driver. We recommend
you to manually installed the most updated driver, which shipped with
ADLINK CD to guarantee the compatibility. After installing the Windows
2000, please update the new drivers by the following procedures.
1. Boot Windows 2000, Click Start. Select Settings then double-click
the Control Panel.
2. Double-click on the System icon, click Hardware tab, click Device
Manager button.
3. Double-click either on the Display Adapters or Other Devices entry,
Double-click the Video Controller or Silicon Motion Lynx3DM entry.
4. Click on the Driver tab, then click Update Driver… button.
5. An Upgrade Device Driver Wizard windows, click NEXT>.
6. Select Display a list of ... and click NEXT.
7. The next window may show a list of hardware type, then select
Display Adapters, then click OK.
8. This window may show a list of VGA model numbers.
9. Insert ADLINK CD and click Have Disk.
10. Browse the SM721 driver in the following path:
X:\CHIPDRV\VGA\SM721\WIN2K, highlight smisetup.inf, click
OPEN, then click NEXT>.