User`s guide

Driver Installation • 27
4
Driver Installation
To install the drivers and utility for the cPCI-3700A, please refer the detail
installation information from this Chapter. We provide the basic information
in this manual, however, for more detail installation information, such as
non-Windows OS installation, please refer the extensive explanation inside
the ADLINK CD. We put the chip drivers in the following directories:
Chipset driver \CHIPDRV\Chipset\440BX
VGA/AGP relative driver \CHIPDRV\VGA\SM721
LAN relative driver \CHIPDRV\LAN\100PDISK
Watchdog relative library \CHIPDRV\WDT
Hardware Doctor Utility \Utility\HWDoctor\I2C
In this users manual, the Bus-mastering IDE driver installation is not
described because most of the Windows based OS will install those drivers
automatically.
Due to the Windows NT is a none plug-and-play OS, we remind you some
tips for installing the Windows NT here:
1. We suggest installing the LAN driver before installing any service
pack.
2. We suggest installing the VGA/AGP driver after installing the service
pack. Please make sure your service pack do support AGP, service
pack 6 or higher is recommend.
3. Once your NT booting procedure is with warning, please check the
Event Viewer to make sure what is the really problem. Once the