User`s guide
26 • Getting Start
6. Power-on the external CD-ROM drive and put the bootable CD that
contains the desired OS into drive.
7. Power-on the system and press <DEL> key to enter the BIOS setup
utility. Then, set the boot sequence beginning from SCSI in BIOS
features setup. Save and exit the BIOS setup utility.
8. After power-on-self-test (POST), go into SCSI adaptor utility (usually
press Ctrl-C or F2, please refer to the user’s manual of SCSI interface
module.) Then, check the SCSI adaptor is bootable. Save and exit
the SCSI adaptor utility.
9. The system will boot from the SCSI CD-ROM.