User`s guide

Hardware Installation • 23
2.5 FDD Removal and Installation
In cPCI-3700A user can install one 3.5 inches slim type FDD. Three slots
version of cPCI-3700A module comes with FDD module installed.
FDD Removal
To remove the FDD module, please follow this procedure
• Disconnect the flex cable connector of the FDD
• Remove the 4 screws on two side of FDD
• Remove the FDD carefully
• Remove the FDD housing frame
• Remove the flex cable from the connector on daughter board
FDD Installation
To install the FDD, please follow this procedure
• Connect the flex cable one end with the connector on daughter board.
Leave the other end floating at the moment
• Install the FDD housing frame
• Install the FDD on the FDD housing frame with the screw holes align
with those on the housing
• Screw the FDD with 4 screws
• Connect the flex cable to FDD