User`s guide

14 • Hardware Installation
2.2.2 The cPCI-R3700A Rear I/O Transition Module
The following picture shows the cPCI-R3700A rear I/O transition module.
The rear faceplate DB-9 connector is COM2 port. LCD pin-headers
connector and COM2 pin-headers connector are available on the board.
Note: Do NOT connect devices to the COM2 pin-headers on board and
DB-9 on rear faceplate at the same time. This may cause system
damages.
COM2 (DB9)
COM2 (Pin headers)
RJ2
LCD