User`s guide

Introduction • 5
USB Interface
• Two USB ports on front faceplate.
• USB Specification Rev. 1.1. compliant
• Individual over-current protection
On Board Supper I/O
• Winbond W83977EF
• One high-speed bi-directional SPP/EPP/ECP parallel port with ESD
protection to 4KV and downstream device protection to 30V
• One floppy interface, support slim type floppy drive
• Two 16C550 UARTs compatible RS-232 COM ports with ESD
protection to 2KV, COM1 on front faceplate, selectable
RS-232/422/485 COM2 port on rear I/O transition module
Watchdog Timer
• Programmable I/O port 3F0h and 3F1h to configure watchdog timer,
programmable timer 1~255 seconds or 1~255 minutes
• Bundled easy-programming library for DOS, Windows 95, 98, NT
Hardware Monitoring
• Winbond W83782D, monitoring CPU temperature, CPU fan, system
temperature and DC Voltages
On-board VGA/LCD Display
• AGP 2x VGA/LCD controller SMI Lynx3DM SM721, with build-in 4M
VRAM (8M VRAM available for big quantity OEM project)
• VGA display on front faceplate, 24-bit RGB-TFT LCD connector on
rear I/O transition module
• High performance, 128-bit, single clock cycle 2D drawing engine
• High performance, power managed 3D acceleration engine
• AGP 2x, ACPI, VESA DPMS and VESA DDC 2b compliant
• Supports up to 1280x1024 VGA display resolution with 24-bit true
color, non-interlaced
• Dual display and simultaneous display for VGA and LCD
• RAMDAC Latch-up protection
• Driver supporting: Windows95/98/ME/NT/2000, Linux, OS/2