User`s manual

Introduction 1
1 Introduction
The cPCIS-6400U/6400X Series subsystems are designed for 6U
cPCI boards with 80mm RTMs. The chassis is 4U in height and
standard 19” rack mount width.
The cPCIS-6400U provides 2+1 hot swappable 500W+250W
redundant power supplies with universal AC input, while the
cPCIS-6400X has a built-in 400W AC-input ATX power supply
with cooling fan. Both series have PICMG 2.1 Hot Swap compliant
32/64-bit 5-slot CompactPCI backplanes and a PICMG 2.5 H.110
CT Bus.
1.1 Features
General
X 19” rackmount, 4U height for 6U cPCI cards with 80mm rear
RTMs for I/O
X Standard 6U CompactPCI and optional PICMG 2.5 H.110
CT bus
X PICMG 2.1 Hot Swap compliant 32-bit/33MHz or
64-bit/66MHz 5-slot CompactPCI backplane with P3 & P5
rear I/O
X 2+1 hot swappable 500W+250W redundant power supplies
with universal AC input (cPCIS-6400U)
X Built-in 400W AC-input ATX power supply (cPCIS-6400X)
X Dual removable ATA-100 or SCSI 3.5” hard drive racks
(cPCIS-6400US and cPCIS-6400XS models are SCSI
equipped)
X Front drive bay space for one slim type EIDE CD-ROM and
one slim type floppy.
X One front-access intake fan, two (three for cPCIS-6400U)
rear-access and four side exhaust fans are used for system
cooling. Air-filter is replaceable on front-access fan module.
(Only cPCIS-6400U fans support hot swap).