User`s manual

14 Getting Started
2. Lift the rack handle outwards and pull the hard drive rack
out of the drive bay.
Figure 2-6: Remove the hard drive rack from the drive bay
3. Insert the hard drive into the rack and secure with
screws as per standard hard drive installation procedure.
4. For IDE hard drives, attach the ribbon cable and power
cord to the back of the drive (skip for SCSI drives).
5. Insert the hard drive rack into the drive bay and push
down on the handle until the rack is firmly secured in
place.
6. To lock the rack, insert the key into to the keylock and
rotate it counter-clockwise so that the key is in the 12
o’clock position.
Rack Insertion And Removal
Follow the instructions for Hard Drive Installation above, skipping
steps 3 and 4.