User`s manual

12 Getting Started
2.4 Power Supply Unit Replacement
(cPCIS-6400U only)
The cPCIS-6400U series subsystems come with cPS-H325 PSUs
pre-installed. The removal and installation procedures for PSUs
are the same as for CompactPCI cards, except there is only one
handle. To replace a PSU module, refer to the figures and instruc-
tions below.
1. To remove the PSU module, undo the retaining screws
and unlatch the handle by pressing on the release button
with your thumb.
Figure 2-3: Unlatch the PSU module handle