User`s manual

60 Chassis Management Module
6.3 CMM Firmware Update
This section describes how to perform a firmware update for the
CMM. You will need the following:
X TFTPD32 (Windows TFTP server – freeware, available at
http://tftpd32.jounin.net/)
X New firmware binary file (complete.bin & complete.001)
Connect the remote console to the CMM’s LAN port with a cross-
over cable as described in Section 5.5 above.
Create new folder for firmware files:
Create a new folder (e.g. E:\RMC-SDK\Build\fwupdate) and then,
copy the new firmware (complete.bin & complete.001) into it. This
directory will be entered into the TFTP server’s parameter settings
below.
Install TFTP Server
Before the CMM firmware upgrade can be performed, it is neces-
sary to setup up a TFTP server on the remote console.
1. Power up the remote console.
2. Extract the downloaded TFTP files to a folder.
3. Run TFTPD32.exe.