User`s manual
10 Getting Started
Figure 2-1: cPCIS-3320 Series slot layout.
The handles on CompactPCI cards and PSUs ensure simple and
safe installation and removal. Please follow the procedures below
to install a CompactPCI module into a chassis:
CompactPCI Card Installation/Removal Procedure
1. Place the sub-system on a level surface or rackmount it.
Remove the blanking plates where required by undoing
the retaining screws at each end. Retain the blanking
plates for possible future use. The system should not be
put into use without blanking plates for all empty slots,
otherwise the EMC and cooling performance will be
compromised
2. Hold the host board or peripheral card module vertically.
Make sure that the handles are unlatched (i.e. that they