User`s guide

48 • Driver Installation
4.2.5 Intel 82559 Driver Installation on Windows NT
Before installing the LAN driver on Windows NT, copy the LAN driver files in
the CD to a floppy diskette. Insert a new diskette into drive A: then type the
following batch command under a DOS environment to copy the relative NT
LAN drivers X:\CHIPDRV\LAN\100PDISK.
Windows NT may ask to install a LAN driver from its own library of drivers. To
guarantee compatibility, manually updated the LAN driver, which comes with
the ADLINK CD. After installing Windows NT, update to the new driver using
the following procedures.
1. In the Control Panel, double-click on the Network icon, a Network
Configuration window will appear. Click Yes.
2. In the Network Setup Wizard, click Next>, click the Select From List…
button.
3. Insert the LAN driver floppy diskette into drive A: and click Have Disk.
4. In the dialog box of Insert Disk window, type in A: then Click OK.
5. An OEM Selection Options window pops up, click OK, and then click
Next>.
6. Select the necessary Network Protocols, and click Next>.
7. Select the necessary Network Services, and click Next>.
8. Continue to click Next> until Window NT Setup dialog box pops up. Type
in D:\i386 (drive D:\ is assumed to be where WinNT resides) in the
dialog box, then insert the original Windows NT CD, click Continue.
9. Click OK when the setup is completed.
10. Reboot the computer.