User`s guide

Driver Installation • 41
4.1 VGA Drivers Installation
This section provides information on how to install the VGA driver that come
in the CD with the package. Please follow the instructions carefully in this
section. Note that there must be relevant software installed in your system
before you are permitted to install the VGA driver.
4.1.1 Display Driver for Windows 98/ME
The following section describes the normal procedures for installing the
display driver for Windows 98/ME.
Installing the Drivers for Windows 98/ME
1. Boot Windows 98/ME.
2. The driver is included in the ADLINK CD. R un the W98600.exe under the
following directory: X:\CHIPDRV\VGA\69000\win98.
3. Click Next> on Welcome screen, and continue with the Setup program.
4. At the “Software License Agreement” screen. Click yes> to install the
driver. Finally, click Finish to re-boot.
4.1.2 Display Driver for Windows NT 4.0
The following section describes the normal procedures for installing the
display driver for Windows NT 4.0.
Installing the Drivers for Windows NT 4.0
[IMPORTANT]: You must install Windows NT 4.0 with at least Service Pack 4
(version number: 4.00.1381) first before installing the VGA driver. If you don't
have Windows NT 4.0 Service Pack 4, contact your software vendor or
download it from Microsoft's web site.
1. Boot Windows NT 4.0.
2. The driver is included in the ADLINK CD. Locate the following directory:
X:\CHIPDRV\VGA\69000\winnt.
3. Click the Start button, then go to Settings and click on Control Panel.
4. Double-click Display icon. Select Settings tab and click Display Type…
button. Click Change button on Display Type screen.
5. Click Have Disk, then type in the path and the folder driver files
X:\CHIPDRV\VGA\69000\winnt and click ok.
6. Select the Video Accelerator Chipset from the Display list provided and
click ok.