User`s guide

Introduction • 15
The cPCI-6765(A) is supplied with a heatsink allowing the processor to
operate between 0º and approximately 55º C ambient with a minimum of 1
meter per second of external airflow. It is the users' responsibility to ensure
that the cPCI-6765(A) is installed in a chassis capable of supplying
adequate airflow. The maximum power dissipation of the processor at
850MHz (BGA2 package) is 29W. External airflow must be provided at all
times. ADLINK has special designed chassis to allow for greater airflow,
please contact ADLINK sale representatives for more detail.
CAUTION: The processor "core" temperature must never exceed 100°C
under any condition of ambient temperature or usage. This may
result in permanent damage to the processor.
1.4.2 cPCI-R6765 Specifications
Form Factor
• Standard 6U CompactPCI rear I/O (board size: 233.35x80mm
2
)
• 1-slot width (4HP = 20.32 mm)
Available Rear I/O Ports
• Onboard two 40-pins IDE connectors for Primary and Secondary IDE.
• One USB version 1.1 port on rear panel.
• One DB-25 LPT connector with full IEEE-1284 capability.
• One standard analog SVGA output connector on rear panel.
• Two switch-selectable Ethernet ports on rear panel.
• Onboard floppy interface configured for PS/2 compatibility with 34-pin
header.
• COM1 with onboard 10-pins header and RS-232/422/485/485+
selectable COM2 with DB9 connector on the rear panel.
• Two 6-pin circular DIN connectors for keyboard and mouse on the rear
panel.