User`s guide

Introduction • 11
CompactPCI interface:
• cPCI-6765 is a peripheral board design, suitable in peripheral slots,
operated as a peripheral card in distributed multi-processor
architecture.
• Intel 21555 non-transparent PCI-to-PCI bridge interface on J1.
• 32-bit/33MHz PCI operation.
• Supports both 5V and 3.3V signaling
Host Memory:
• Supports up to total 512MB by up to two 144-pin SO-DIMM sockets
• Each 144-pin SO-DIMM socket supports up to 256MB PC-100 memory
module which uses 16Mx8 SDRAM technology
• Optional ECC support (for big quantity OEM project)
BIOS: Award PnP BIOS:
• BIOS write protection, provide anti-virus capability
• On-board Ethernet, hardware monitoring function disable selectable
• Customized power-on screen (for OEM project)
• DMI BIOS Support: Desktop Management Interface (DMI) allows users
to download system hardware-level information such as CPU type, CPU
speed, internal/external frequencies and memory size.
• Green Function: Power management via BIOS, activated through
mouse/keyboard movement.
• Remote Console: setup console redirection to serial port (terminal
mode) with CMOS setup access
• Diskless, keyboardless and videoless operation extensions
Hot swap support:
• Support both system mode and peripheral mode hot swap.
• In system mode: Ejector in handle can generate soft-off signal for
on-board system power off.
• In peripheral mode: Ejector in handle can generate an ENUM# trigger
signal to issue hot swap interrupt to system host.