User`s guide

Introduction • 3
1.2 Features
• PICMG 2.0 CompactPCI Specification R3.0 Compliant.
• PICMG 2.1 CompactPCI Hot Swap Specification R2.0 Compliant.
• PICMG 2.16 CompactPCI Packet Switch Backplane Specification node
slot compatible.
• PICMG 2.9 CompactPCI System Management Specification R1.0
Compliant.
• Design for low power BGA2 Pentium-III CPU running at FSB 100MHz.
• Supports operation in peripheral mode, non-J4 connector for inserting
into H.110 Backplane.
• Supports up to total 512MB with optional ECC capability
• Space for build-in 2.5” low profile HDD
• Supports up to one 32-bit PMC module socket
• Supports up to 2 USB ports, 2 serial port, 1 parallel port
• Supports 32-bit PCI at 33MHz operation
• Supports dual 10/100Mb Ethernet ports for selectable front panel I/O,
PICMG 2.16 backplane I/O or rear panel I/O.
• Supports Intel pre-boot execution environment (PXE) for remote boot
• Supports CompactFlash type-II socket by removable daughter board
• Supports rear I/O configuration
• Supports remote console
• Supports soft power-off triggering for Windows-based OS shut-down
• WDT status indication