User`s manual

Appendix 55
7. Replace the metal plate and fasten the screws and foot
stand.
Handling the Chassis
The PXIS-2719 is designed for both rack-mounting and bench-top
usage. When you transport or carry the chassis, it is recom-
mended that you use the handle. The handle is designed to carry
the weight of the chassis for superior portability and balance.
The PXIS-2719 weights 13.4 kg. Please be carefully when moving
the chassis to avoid any possible injury.
Cleaning the Exterior
Make sure that you turn the system off before cleaning the chassis
exterior. Wipe the exterior with a clean cloth starting from areas
that easily accumulate dust or dirt such as the area in and around
the chassis and power supply air inlet apertures.
Power Requirements
Make sure that the power cord is in good condition before plugging
it into the system. You also need to check the reliability of the
power source. The PXIS-2719 power supply is capable of han-
dling 90 V to 264 V AC within the 47 Hz to 63 Hz range. Do not
connect the PXIS-2719 on an already overloaded circuit.