User`s manual

24 Installation
3.3.2 Installing the System Controller
The PXIS-2719 comes with a system controller slot that supports
a PXI system controller of 3-slot width. We recommend the follow-
ing system controllers for use with the PXIS-2719:
X ADLINK PXI-3950 Core 2 Duo PXI controller
X ADLINK PXI-3920 Pentium M PXI controller
X ADLINK PXI-3910 Celeron M PXI controller
To install the system controller:
1. Make sure that the CPU, memory module(s), and stor-
age device(s) are properly installed on the system con-
troller.
2. Locate the system controller slot (Slot 1).
3. Push down (loosen) the system controller module’s ejec-
tor/injector handle.
4. Align the module’s top and bottom edges to the card
guides, then carefully slide the module into the chassis.