Specifications

70 IPMI User Guide
OemPowerOff
This command is implemented to control the system’s status if
power-off is required. Operators can control the system remotely.
OemPowerOn
This command is implemented to control the system’s status if
power-on is required. Operators can control the system remotely.
Action Byte Value Description
Request 0 C0h NetFn/LUN for OEM
1 F6h OEM defined command
Response 0 Complete Code 00h means OK
Action Byte Value Description
Request 0 C0h NetFn/LUN for OEM
1 F7h OEM defined command
Response 0 Complete Code 00h means OK
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com