Specifications

28 Jumpers and Connectors

Note 1: These signals are not connected on the board.

Note 2: These signals are pulled high on the board.

Note 3: These signals are pulled low on the board.

Note 4: The VIO signals by default set to +3.3V via zero ohm resis-

tors. Therefore, DO NOT apply any 5V only PMC module to

the PMC sockets.

Note 5: J24 signals are connected to the CompactPCI J5 connector.

To use these signals, the RTM needs to be either custom de-

signed for special purposes or have a PIM connector avail-

able on RTM.

VIO(4) 57 58 AD32 PMCIO57 57 58 PMCIO58

N/C 59 60 N/C PMCIO59 59 60 PMCIO60

N/C 61 62 GND PMCIO61 61 62 PMCIO62

GND 63 64 N/C PMCIO63 63 64 PMCIO64

Signal

Name

J13, J23

Signal

Name

Signal

Name

J24(5)

Signal

Name

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com