Specifications

14 Introduction

Environment

X Operating temperature: 0 to 55°C

(1)

Storage temperature: -20 to 80°C

X Humidity: 5% to 95% non-condensed

X Shock: 15G peak-to-peak, 11ms duration, non-operation

X Vibration:

(2)

Non-operation: 1.88Grms, 5-500Hz, each axis

Z Operation: 0.5Grms, 5-500Hz, each axis, with 2.5” HDD

Safety Certificate and Test

X CE, FCC Class A

X All plastic material, PCB and Battery used are all UL-94V0

certified

X Designed for NEBS 3.0 requirement

Power Requirement

(3)

Note 1: Certified with ADLINK thermal design. The thermal perfor-

mance is dependent on the chassis cooling design. Forced

air-cooling with 50 CFM is required. Temperature limit of

optional mass storage devices can impact the thermal spec-

ification.

Note 2: Operational vibration is limited by the 2.5 inches HDD. When

application requires higher definition for anti-vibration, we

recommend using Flash disk or CompactFlash.

Note 3: The power requirement is measured by Windows 2000 and

a few computing power stressed application software. The

following devices are installed when testing the power con-

sumption: DDR333 RAM, a 20GB HDD, a 16MB CF, key-

board, mouse, and GbE. The power requirements for 5V and

3.3V rails are varied for different applications. This table lists

the peak power requirement of 5V and 3.3V for different ap-

plications. The total power requirement is listed.

Configuration +5V +3.3V +12V -12V Total

Single Pentium 1.6G 512MB RAM,

20GB HDD

10.0A 4.1A 0.2A 0 > 61.2W

Table 1-2: Power Ratings

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com