User`s manual

58 BIOS Setup Utility
ATA/IDE Configuration
This item specifies whether the IDE channels should be initial-
ized in Compatible or Enhanced mode of operation. The set-
tings are Disabled, Compatible and Enhanced.
Configure SATA as
This option controls the SATA controller’s operating mode: IDE
mode or AHCI mode.
Primary IDE Master/Slave, Secondary IDE Master/Slave
Select one of the hard disk drives to configure it. Press
< Enter > to access its sub menu.
Hard Disk Write Protect
This will be effective only if the device is accessed through
BIOS. The settings are Enabled and Disabled.
IDE Detect Time Out (Sec)
Select the time out value for detecting ATA/ATAPI devices.