User`s manual

IPMI Interface 47
AMC-1000
Get Sensor Event Status 29.13 S/E 2Bh Optional
Get Sensor Reading 29.14 S/E 2Dh Mandatory
Get Sensor Type 29.16 S/E 2Fh Optional
FRU Device Commands
Get FRU Inventory Area Info 28.1 Storage 10h Mandatory
Read FRU Data 28.2 Storage 11h Mandatory
Write FRU Data 28.3 Storage 12h Mandatory
AdvancedTCA™ Commands
Get PICMG Properties 3-10 PICMG 00h Mandatory
FRU Control 3-25 PICMG 04h Mandatory
FRU Control Capabilities 3-24 PICMG 1Eh Mandatory
Get FRU LED Properties 3-27 PICMG 05h Mandatory
Get LED Color Capabilities 3-28 PICMG 06h Mandatory
Set FRU LED State 3-29 PICMG 07h Mandatory
Get FRU LED State 3-30 PICMG 08h Mandatory
Get Device Locator Record ID 3-35 PICMG 0Dh Mandatory
AMC® Commands
Set AMC Port State 3-26 PICMG 19h Mandatory
Get AMC Port State 3-27 PICMG 1Ah Mandatory
HPM.1 Upgrade Commands (HPM.1)
Get target upgrade
capabilities
3-3 PICMG 2Eh Mandatory
Get component properties 3-5 PICMG 2Fh Mandatory
Abort Firmware Upgrade 3-15 PICMG 30h Optional
Initiate upgrade action 3-8 PICMG 31h Optional
Upload firmware block 3-9 PICMG 32h Mandatory
Finish firmware upload 3-10 PICMG 33h Mandatory
Activate firmware 3-11 PICMG 35h Mandatory
Query Self-test Results 3-12 PICMG 36h Optional
Query Rollback status 3-13 PICMG 37h Optional
Initiate Manual Rollback 3-14 PICMG 38h Optional
Command
IPMI/PICMG
Spec Ref.
NetFn CMD IPM Controller
Req