User`s manual

Connectors and Switches 29
AMC-1000
4.3 AMC Module Card-edge Interface
The AMC Connector supports 170 contacts which are allocated to
the five functional groups as follows:
X 40 signal pairs allocated to the Fabric Interface
X 5 signal pairs allocated to the AMC Clock Interface
X 5 contacts allocated to the JTAG Test Interface
X 9 contacts allocated to the System Management Interface
X 8 contacts allocated to Payload Power
X 56 contacts to allocated to Logic Ground
X 2 contacts reserved
The AMC-1000 connector is designed to be compliant with PICMG
AMC.0 and fully compatible to the any standard AMC Carrier
Board. The AMC-1000 is hot-swappable.
AMC-1000 Card-edge Interface Pin Assignments
The AMC-1000 Connector is a single-part Z-Pluggable Connector
containing groups of contacts for power, general purpose connec-
tions, and very high speed transmissions. The pin assignments
are as follows.