Specifications

Chapter 4 BIOS Setup
40 Reference Manual CoreModule 720
• GPIO Configuration
♦ GPIO 0 [Disabled; Enabled]
♦ GPIO 1 [Disabled; Enabled]
♦ GPIO 2 [Disabled; Enabled]
♦ GPIO 3 [Disabled; Enabled]
♦ GPIO 4 [Disabled; Enabled]
♦ GPIO 5 [Disabled; Enabled]
♦ GPIO 6 [Disabled; Enabled]
♦ GPIO 7 [Disabled; Enabled]
♦ GPIO 8 [Disabled; Enabled]
♦ GPIO 9 [Disabled; Enabled]
♦ GPIO 10 [Disabled; Enabled]
♦ GPIO 11 [Disabled; Enabled]
• Thermal Configuration
♦ Critical Trip Point [POR; 30 C; 40 C; 50 C; 60 C; 70 C; 80 C; 90 C; 95 C]
♦ Active Trip Point [Disabled; 30 C; 40 C; 50 C; 60 C; 70 C; 80 C; 90 C; 95 C; 100 C]
♦ Passive Trip Point [Disabled; 30 C; 40 C; 50 C; 60 C; 70 C; 80 C; 90 C; 95 C; 100 C]
• Passive TC1 Value [1]
• Passive TC2 Value [5]
• Passive TSP Value [10]
♦ Thermal Offset [Disabled; Enabled]
♦ DTS Calibration [Disabled; Enabled]
• SDIO Configuration
♦ SDIO Access Mode [Auto; DMA; PIO]
• USB Configuration
♦ USB Devices:
1 Keyboard
• Legacy USB Support [Disabled; Enabled]
• EHCI Hand-off [Disabled; Enabled]
♦ USB hardware delays and time-outs:
• USB transfer time-out [1 sec; 5 sec; 10 sec; 20 sec]
• Device reset time-out [10 sec; 20 sec; 30 sec; 40 sec]
• Device power-up delay [Auto; Manual]
• ADM1032 H/W Monitor
♦ CPU Health Status
• CPU Temp : +XX
• Serial Port Console Redirection
♦ COM0 (Pci Bus2, Dev10, Func1)
• Console Redirection [Disabled; Enabled]