User's Manual

2
1.2 COM-PT Installation
The COM-PT is a SOM (System on Module), which can be combined design
with any industrial or consumer products as well as general purpose system
or devices goods.
The carrier board for COM-PT is depends on the customer application
requirement. The standard interface between COM-PT and customer’s
carrier board are using FOXCONN AS0B946-S50U-7H connector for I/O
communication and functionality implements.
Below are the roughly procedures for COM-PT install into the customer’s
carrier board.
Step1
Using 25 degrees angle to insert
DDR2 SO-DIMM memory into the
SO-DIMM socket.
Step2
Pressed DDR2 memory until it
completed locked into the
SO-DIMM socket.