COM-PT Installation Guide ADLINK TECHNOLOGY INC.
1. Hardware Installation 1.
1.2 COM-PT Installation The COM-PT is a SOM (System on Module), which can be combined design with any industrial or consumer products as well as general purpose system or devices goods. The carrier board for COM-PT is depends on the customer application requirement. The standard interface between COM-PT and customer’s carrier board are using FOXCONN AS0B946-S50U-7H connector for I/O communication and functionality implements.
Step3 Using 25 degrees angle to insert COM-PT into FOXCONN AS0B946-S50U-7H connector.
Step 6 COM-PT hardware installation completed 2. Software Installation The COM-PT is using Intel wireless WiFi adaptors technology. Therefore COM-PT will require same driver and wireless WiFi connection utility as Intel® WiFi Link 1000. For COM-PT detail driver installation and the utility operation, please refer ‘Intel(R) PROSet/Wireless WiFi Connection Utility User's Guide’.
RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2.
