User`s manual

Step3: Select “y” and wait until the string of “firmware update procedure successful”

is displayed.

To update other images (BIOS, FRU, etc), just replace the target image and the file name

while typing command.

Item File name

IPMC firmware hpm1fw.img

BIOS hpm1bios.img

5.3.3 Update over LAN

The following IPMItool command line parameters are used for communicating with the carrier

IPMC via LAN:

 -I lan

The parameter instructs the IPMItool utility to use the RMCP protocol for communicating with

the IPMC.

 -H <IP address >

The parameter specifies the IP address of the IPMC.

Please follow the step to update firmware: