User`s guide

How to use this guide

•

How to Use This Guide

This manual is designed to help you use the ACL-8111. The manual

describes how to modify various settings on the ACL-8111 card to meet

your requirements. It is divided into six chapters:

• Chapter 1, "Introduction," gives an overview of the product

features, applications, and specifications.

• Chapter 2, "Installation," describes how to install the ACL-

8111. The PCB layout is shown, the switch setting for base

address, and jumper setting for analog input channel

configuration, reference voltage setting are specified. The

connectors' pin assignment and how to connect the outside

signal are described.

• Chapter 3, "Registers format," describes the details of

information is very important for the programmers who

want to control the hardware by low-level programming.

• Chapter 4, "Operation Theorem" describes how to operate

the ACL-8216. The A/D, D/A, DIO and timer/counter

functions are introduced. Also, some programming

concepts are specified.

• Chapter 5, "C/C++ Library," describes the C++ Library for

DOS environment.

• Chapter 6, "Calibration and utilities," describes how to

calibrate the ACL-8111 for accurate measurement.