User`s guide

C/C++ Library for DOS • 43
_8111_AD_Set_Gain( AD_GAIN_8 );
printf( "The A/D analog input range is +/-
0.625V now.\n" );
}
5.10 _8111_AD_Set_Mode
@ Description
This function is used to set the A/D trigger and data transfer mode by
means of writing data to the mode control register. The hardware
initial state of the ACL-8111 is set as AD_MODE_1 software( internal)
trigger with program polling data.
A/D Mode Description
AD_MODE_0 Software Trigger, Software Polling Transfer
AD_MODE_1 Software Trigger, Interrupt Transfer
AD_MODE_2 External Trigger, Software Polling Transfer
AD_MODE_3 External Trigger, Interrupt Transfer
AD_MODE_4 Timer Trigger, Software Polling Transfer
AD_MODE_5 Timer Trigger, Interrupt Transfer
@ Syntax
int _8111_AD_Set_Mode(int irq_no, int ad_mode )
@ Argument:
irq_no: interrupt IRQ level
ad_mode: AD trigger and data transfer mode
( please to refer above table.)
@ Return Code:
ERR_NoError
ERR_BoardNoInit
ERR_InvalidMode
@ Example:
#include “aclerr.h”
#include “8111.h”
main()
{