User`s guide

Installation

•

2.7 Daughter Board Connection

The ACL-8111 can be connected with five different daughter boards

ACLD-9137, 9182, 9185, and 9188. The functionality and

connections are specified as following:

2.7.1 Connect with ACLD-9137

The ACLD-9137 is a direct connector for the card, which is equipped

with 37-pin D-sub connector. This board provides a simple way for

connection. It is very suitable for the simple applications that do not

need complex signal condition before the A/D conversion is

performed.

2.7.2 Connect with ACLD-9182

The ACLD-9182 is a 16 channel isolated digital input board. This

board is connected with CN2 of ACL-8111 via 20-pin flat cable. The

advantage of this board is a 500Vdc isolation voltage is provided,

and it can protect your PC system from damage when an abnormal

input signal is occurred.

2.7.3 Connect with ACLD-9185

The ACLD-9185 is a 16 channel SPDT relay output board. This

board is connected with CN3 of ACL-8111 via 20-pin flat cable. By

using this board, you can control outside device through the digital

output signals.

ACLD-9185

ACL-8111ACLD-9182

CN2

CN3