User`s guide

•

Installation

You are now ready to install your ACL-8111.

2.2 What You Have

In addition to this User's Manual, the package includes the following

items:

• ACL-8111 multi-function data acquisition card

• ADLINK Software CD

If any of these items is missing or damaged, contact the dealer from

whom you purchased the product. Save the shipping materials and

carton in case you want to ship or store the product in the future.

2.3 PCB Layout

In ACL-8111, there are three connectors (CN1~CN3), one switch

(SW1), one jumper (JP1) and 5 variable resistors (VR1~VR5).

Please refer Figure 2.3 to identify the location these components.

The card's jumpers and switches are preset at the factory. Please

setup the switch and jumper according to the system setting and the

application requirements.

A jumper is closed (sometimes referred to as "shorted") with the

plastic cap inserted over two pins of the jumper. A jumper is open

with the plastic cap inserted over one or no pin(s) of the jumper.