User`s manual

58 C/C++ Libraries
72XX Series
User’s Manual
@ Argument
cardNo: Card number which the DIO will be reset.
c1: If the interrupt source is set as internal timer
source, this value is the frequency divider of
Timer#1.
c2: If the interrupt source is set as internal timer
source, this value is the frequency divider of
Timer#2.
ctrlValue: The value for INT mode setting. The value
can be set for INT1 is INT1_OFF,
INT1_P1C0, INT1_P1C3C0, or
INT1_EVENT_IRQ. The value can be set
for INT2 is INT2_OFF, INT2_P2C0,
INT2_P2C3C0, or INT2_TIMER_IRQ.
Please refer to section 3.3.4 for detailed
description.
hIntEvent: The handle of the event for interrupt sig-
nals.
@ Return Code
ERR_NoError