Technical data

About this operating manual
Operating manual 743-221-01 version 01.0 - 09/2013
5
1.5.1 Transportation
Dürkopp Adler cannot be held liable for any damage during transport.
Check the delivered product immediately after receiving it. Report any
damage to the last transport manager. This also applies if the packaging
is not damaged.
Keep the machines, devices and packaging material in the condition they
were at the time when the damage was identified. That secures any claims
towards the transport company.
Report all other complaints to Dürkopp Adler immediately after receiving
the product.
1.5.2 Intended use
The Beisler 743-221-01 is for sewing light to moderately heavy material.
The machine is only intended for processing dry material. The material
must not contain any hard objects.
The seam is generally sewn with sewing yarns made from textile fibers of
these dimensions: up to 40/NeB (cotton thread), 65/2 Nm (synthetic
threads) or 65/2 Nm (core threads). If other kinds of threads are to be
used, the possible dangers arising from them have to be assessed and, if
necessary, safety measures have to be taken.
The sewing machine is intended for industrial use.
The machine may only be set up and operated in dry conditions on well-
maintained premises. If the machine is operated on premises that are not
dry and well-maintained, then further measures may be required which
must be compatible with EN 60204-31:1999.
Only authorized/trained persons may work on the machine.
The manufacturer will not be held liable for damage resulting from improp-
er use.
Danger due to high voltage, crushing and
sharp objects.
Improper use can result in injuries.
Please follow all instructions in the manual.
WARNING
Improper use could result in material damage.
Please follow all instructions in the manual.
ATTENTION