Technical data

Installation
58
Operating manual 743-221-01 version 01.0 - 09/2013
6.7.2 Loading the program
Fig. 35: Connecting the dongle
1. Turn off the main switch.
2. Insert the dongle (1) into the plug-in position (2) of the control unit.
3. Turn the main switch on. The Software will be loaded. The loading pro-
cess takes less than 60 seconds.
4. Turn off the main switch.
5. Remove the dongle (1).
6. Turn the machine on again.
Material damage!
During the loading process do not remove the dongle and do not
switch off the machine (otherwise you will destroy the software).
ATTENTION
(1) - Dongle (2) - Plug-in position
཰
ཱ