Technical data

Installation

Operating manual 743-221-01 version 01.0 - 09/2013

6.7 Installation of the software

6.7.1 General information

Loading a specific sewing software in the DAC classic control unit is pos-

sible with the help of the “Programmed Dongle”. The “Programmed Don-

gle” has a label indicating the machine class and the software version.

Such a loading (booting) may be used in order to provide a single DAC-

classic control unit with a sewing software (first installation) or to install a

newer machine software (update).

With the delivery of the machine only the test software (allowing the load-

ing of sewing software) is installed in the control unit. The test software of-

fers no further functions. If the test software gets damaged during the

loading process, it is no longer possible to load a software using a dongle.

In such a case use a PC with a loader cable.

The instructions for the DAC classic control unit is enclosed with the ma-

chine.

Material damage!

The sewing unit is delivered with a machine software installed on it.

ATTENTION

Turn off the main switch before connecting the dongle.

ATTENTION