Technical data

Installation
48
Operating manual 743-221-01 version 01.0 - 09/2013
6.2 Installing the sewing unit
6.2.1 Transportation
.
Lifting the sewing unit
• Only with an elevating platform truck or a forklift.
For in-house transport the stand is equipped with four castors.
Rolling the sewing unit
Fig. 26: Transport on castors
1. In order to transport the unit on its castors, turn the setting screws (1)
to (4) counter-clockwise. The feet must have sufficient ground clearance
for transportation.
2. Transporting the sewing unit
3. To lower the sewing unit turn the setting screws (1) to (4) in clockwise
direction. The feet must stand firmly on the ground.
Risk of injury due to incorrect transportation!
Do NOT lift the sewing unit at the table tops.
ALWAYS use an elevating platform truck or a forklift
CAUTION
Risk of injury due to unstable footing!
Before putting the sewing unit into operation screw
in the castors until the unit attains a secure stand-
ing.
CAUTION
཰
ཱ
ཱི
ི
(1) - Adjusting screw
(2) - Adjusting screw
(3) - Adjusting screw
(4) - Adjusting screw