Technical data

Operating the sewing unit
30
Operating manual 743-221-01 version 01.0 - 09/2013
6. Position the hold-down cylinder (4) with the guide roller on the control
cam (3).
7. Slide the template set to the right as far as it will go.
5.12 Working range, angle and length
The dart depth depends on:
• the individual template set
• the dart length
• the position of the folding table
The folding table can be continuously adjusted from 0-10°.
The dart depths for different inclinations and lengths are indicated in the
diagrams.
The curve for the curved darts template set is also indicated.
Fig. 14: Setting the inclination
Setting the inclination
1. Retract the folding table
2. Press the handle (2) together and adjust the folding table according to
the scale (1).
3. Release the handle.
Caution: Danger of injury!
Turn off the main switch.
Set the inclination only with the sewing machine
switched off
ATTENTION!
(1) - Scale (2) - Handle
཰
ཱ