Technical data

Set-up instructions
Operating manual 867 Version 01.0 - 12/2012 83
7.7.1 Fitting the control
The DAC controllers and Efka controllers are installed according
to the same principle.
Figure 53: Fitting the control
1. Screw the control (2) onto the 4 screw holders (3) under the
table plate.
2. Clamp the power cable of the control (2) into the strain relief
mechanism (1).
3. Screw the strain relief (1) under the table plate.
3
2
1
(1) - Strain relief (2) - Control
(3) - Screw holder