Technical data

Set-up instructions
76 Operating manual 867 Version 01.0 - 12/2012
Standard equipment:
• Machine upper section (10)
• Oil pan (9)
• Thread reel holder with unwinding bracket (11)
• Controller (8)
• Keypad for the controller (1)
Optional additional equipment:
• Table plate (2)
• Drawer (3)
• Frame (4)
• Pedal (5)
• Knee lever/switch (6)
• Maintenance unit (7)
• Sewing light (not illustrated)
7.2 Removing the transport securing devices
All transport securing devices must be removed prior to set-up.
1. Remove the lashing straps and wooden blocks from the
machine upper section, the table and the frame.
2. Remove the supporting wedges between the machine arm
and needle plate.