Technical data

Operating instructions
Operating manual 867 Version 01.0 - 12/2012 27
5.2.3 Changing needles on switchable needle bars
Figure 5: Inserting and changing needles on switchable needle bars
1. Turn the handwheel until the needle bars (1) reach the upper
end position.
2. Loosen the fastening screws (2) on both sides.
3. Pull each of the needles out downwards.
4. Insert new needles on both sides.
5. Important: Align the needles so that the grooves (3) face away
from each other. Each groove then faces the hook that belongs
to this needle.
6. Tighten the fastening screws (2) on both sides.
1
2
3
4
(1) - Needle bar
(2) - Fastening screw
(3) - Groove
(4) - Hook