Installation Manual

ASSEMBLY

STEP 1

Place adjustable base shipping container on solid, level

surface. Remove top section of shipping container.

Remove packing material. Carefully, lift adjustable

base out of bottom section of shipping container and

place on clean surface. Note: Allow for enough space to

unfold base in setup area.

Unfold base until ﬂat.

Remove hardware/leg boxes. Before discarding any

packing materials, verify the following items are

included:

• (6) Bed legs

• (1) Remote Control

• (2) AAA Batteries

• (1) Power Supply

• (2) Bolts

• (2) Captive Pins

• (1) Mattress Retainer (cut zip-tie to remove)

• (1) Warranty Activation Card

• (1) Owners Manual

1 - REMOTE CONTROL

1 - WARRANTY

ACTIVATION CARD

1 - OWNERS MANUAL

2 - AAA BATTERIES

1 - MATTRESS

RETAINER

1 - POWER SUPPLY

(power brick and electrical power cord)

2 - BOLTS & CAPTIVE PINS

6 - LEGS