Instructions / Assembly

1”
2” x 4” (NOT INCLUDED)
2” x 4” (NOT INCLUDED)
Step Three
Positioning
A. Slide the latch side of frame onto the spreader bars.
B. Swing the gate to the closed position and adjust the frame to
approximately 2" between the frame and post.
Paso Tres
Posicion
A. Empuje el lado del cerrojo del armazon en los Miembros Interiores
Deslizantes.
B. Cierre la puerta y ajuste el armazon aproximadamente 1" en el medio
del armazon y el poste.
Step Four
2”x4” Installation
A. Measure cut and install 2x4's with screws provided (7,8) as shown.
(Depending on the width of your gate you may not need all of the
long screws (8) in frame.)
Paso Quatro
Instalacion de las 2"x4"
A. Mida, corte y instale los listones de 2"x4" utilizando los tornillos
provistos (7,8), como se muestra en la figura. (Dependiendo del
ancho de la puerta, es probable que Ud. no necesite todos los tornillos
largos (8) en el armazon.)
Step 3
Positioning
Posicion
Step 4
2”x4” Installation
Instalacion de las 2”x4”