User manual

©American Audio® - www.americanaudio.com - UCD-100 MKII Instruction Manual Page 13
FUNCTIONS AND CONTROLS - REMOTE
(+) PITCH BEND - The (+) pitch bend function creates a momentary “BUMP” in the pitch speed
(Beats per minute - BPM) when the PITCH (10) function is activated.
45. KEY LOCK - This button is used to toggle the Master Tempo function on and off.
46. RECORD - This button is activate and deactivate recording.
47. MUTE BUTTON - This button is used to mute playback.
48. VOLUME CONTROL BUTTONS - These buttons are used to adjust the volume of internal attenu-
ator.
49. FOLDER SEARCH BUTTONS - These buttons are used to scroll through the different folders on
your MP3 disc or USB device.
50. TRACK SEARCH BUTTONS - These buttons are used to scroll either forwards or backwards
through a track.
51. SEARCH BUTTONS - These buttons are used to scroll through the different tracks.
52. SGL/CTN - This button allows the unit’s play mode to change between Single and Continuous.
In single mode the unit will play a single track and return to cue mode. In continuous mode the unit
continues to play track by track.
53. CUE - Pressing the CUE button during playback immediately pauses playback and returns the
track to the last set cue point (see setting a CUE POINT, page 17).
54. OPEN/CLOSE (Transport Tray Open/Close) - This button is used to open and close the trans-
port tray. NOTE: When a disc is already loaded in the transport tray, the tray will not open unless the
unit is in pause or cue mode.