User manual
ADJ Products, LLC - www.adj.com - Saber Spot GO User Manual Page 8
Saber Spot GO Installation
Fixtures should be mounted using a mounting clamp (not included), axing it to the mounting
bracket that is provided with the unit. Always ensure that the xture is rmly xed to avoid vibration
and slipping while operating. Always ensure that the structure to which you are attaching the unit is
secure and is able to support a weight of 10 times the unit’s weight. Also, always use a safety cable
(not included) that can hold 12 times the weight of the unit when installing the xture.
The equipment must be installed by a professional, and it must be installed in a place where it is out
of the reach of people’s grasp.
Mounting Clamp
(Not Included)
Hanging Bracket
Safety Cable
(Not Included)
Velcro StrapVelcro Strap
NOTE: This unit comes with 2 velcro safety straps. It is highly suggested that both straps are used to
properly secure the unit.