User manual

ADJ Products, LLC - www.adj.com - Saber Spot GO User Manual Page 3
Saber Spot GO Introduction
Unpacking: Thank you for purchasing the Saber Spot GO by ADJ Products, LLC. Every Saber Spot
GO has been thoroughly tested and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during shipping. If the carton appears to be
damaged, carefully inspect your xture for any damage and be sure all accessories necessary to oper-
ate the unit has arrived intact. In the case damage has been found or parts are missing, please contact
our toll free customer support number for further instructions. Do not return this unit to your dealer
without rst contacting customer support.
Introduction: The ADJ Saber Spot GO is a DMX intelligent, battery powered, compact pinspot with ADJ’s
WiFly TransCeiver with wireless DMX built-in. WiFly control and battery power give you the freedom
to set up your unit where ever you wish without the restrictions of a power cord or DMX cables. The
Saber Spot GO can operate as a stand alone fixture or in a Master/Slave set up. The Saber Spot GO has three
operating modes; dimmer mode, show mode, & DMX controlled. This fixture is suitable for theaters, studios,
retail stores, and other similar locations. For best results use fog or special effects smoke to enhance the beams
projections.
These instructions contain important safety information regarding the use and maintenance of this
system. Please keep this manual with the system, for future reference.
Customer Support: Contact ADJ Service for any product related service and support needs. Also visit
forums.adj.com with questions, comments or suggestions.
Parts: To purchase parts online visit http://parts.adj.com
ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
Voice: 800-322-6337 | Fax: [phone] | [e-mail]
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
Voice: [phone] | Fax: [phone] | [e-mail]
ADJ PRODUCTS LLC USA
6122 S. Eastern Ave. Los Angeles, CA. 90040
323-582-2650 | Fax [phone] | www.adj.com | [e-mail]
ADJ SUPPLY Europe B.V
Junostraat 2 6468 EW Kerkrade, The Netherlands
[phone] | Fax [phone]
www.adj.eu | [e-mail]
ADJ PRODUCTS GROUP Mexico
AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000
[phone]
WARNING! To prevent/reduce the risk of electrical shock or re, do not expose this unit to rain or moisture.
CAUTION! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself,
doing so will void your manufactures warranty. In the unlikely event your unit may require service
please contact ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.