Specifications

ADJ Products, LLC - www.adj.com - Inno Roll HP Instruction Manual Page 9ADJ Products, LLC - www.adj.com - Inno Roll HP Instruction Manual Page 8
Inno Roll HP System Menu
System Menu: When making adjustments press ENTER to
conrm your setup then press and hold the MENU button
for at least 3 seconds. To exit without making any adjust-
ments press the MENU button. The display will lock after 30
seconds, press the MENU button for 3 seconds to unlock.
DMX Address - Set the DMX Address -
1. Press the MENU button until “DMX Addresss” is displayed,
press ENTER.
2. “X” will now be displayed, “X” represents the displayed
address. Press the UP or DOWN buttons to nd your desired
address.
3. Press ENTER to conrm, and then press and hold the MENU
button for at least three seconds to assign.
Show Mode - Show modes 0 - 12 (Factory Shows).
1. Press the MENU button until “Show Mode” is displayed, press
ENTER.
2. “Show X” will now be displayed, “X” representing a number
between 0-12. Programs 1-12 are factory programs, while “Show
0” is random mode. Press the UP or DOWN buttons to nd your
desired show and press ENTER to select your show.
Dimmer Mode - In this mode you can select the dimmer
curve.
1. Press the MENU button until “Dimmer Mode” is displayed,
press ENTER.
2. The current dimmer curve setting will be displayed.
3. Press the UP or DOWN buttons to nd your desired dimmer
curve and press ENTER to conrm. See the Dimmer Curve Chart
on page 20.
Inno Roll HP System Menu
Split Color
Dimmer Limit
MENU
Yes
Slave Mode
Slave 1
Slave 2
No
100
DMX Address
001
512
Show Mode
Show 0
Show 12
Sound Mode
Pan Invert
Back Light
Sound Sense
DMX State
On
Normal
On
0
Blackout
Last State
Dimmer Mode
Stage
TV
Architec
Theatre
Off
Auto Test
Defaults
Reset
Fixture Temp.
Function Hours
Software Version
Yes
No
Off
100