User manual

ManualsBrandsADJ ManualsFollow SpotsFollow Spot

User Instructions

FS600LED Introduction

ADJ Products, LLC - www.adj.com - FS600LED User Manual Page 2

9/13

Unpacking: Thank you for purchasing the FS600LED by ADJ Prod-

ucts, LLC. Every FS600LED has been thoroughly tested and has been

shipped in perfect operating condition. Carefully check the shipping

carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your xture for any

damage and be sure all accessories necessary to operate the unit has

arrived intact. In the case damage has been found or parts are miss-

ing, please contact our toll free customer support number for further

instructions. Do not return this unit to your dealer without rst contact-

ing customer support.

Introduction: The ADJ FS600LED is part of a continuing pursuit to

create high quality intelligent lighting. The FS600LED is a modern 60W

LED follow spot. It features a bright 60W LED, 8 colors, variable strobe

speed and dimming capabilities. This fixture is suitable for theaters,

studios, retail stores, and other similar locations.

Customer Support: ADJ Products, LLC provides a customer sup-

port line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (323) 582-3322

Fax: (323) 582-3108

E-mail: support@adj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

FS600LED

Summary of content (6 pages)

PAGE 1
FS600LED Introduction Unpacking: Thank you for purchasing the FS600LED by ADJ Prod- FS600LED ucts, LLC. Every FS600LED has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact.
PAGE 2
FS600LED General Instructions To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference.
PAGE 3
POWER FS600LED Set Up FS600LED Power Supply: The ADJ FS600LED contains a automatic voltage switch, which will auto sense the voltage when it is plugged into the power source. With this switch there is no need to worry about the correct power voltage, this unit can be plugged in anywhere. DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used as a form of communication between intelligent fixtures and controllers.
PAGE 4
FS600LED Operating Instructions FS600LED DMX Mode: Operating through a DMX controller gives the user the freedom to create their own programs tailored to their own individual needs. This function also allows you to use your fixtures as spot lights. The FS600LED has 3 DMX channels. See page 8 for the DMX traits. 1. This function will allow you to control each individual fixture’s traits with a standard DMX 512 controller. 2. Plug in the fixture via the XLR connections to any standard DMX controller.
PAGE 5
FS600LED Fuse Replacement The fuse holder located at the rear of the unit above the power cord. Disconnect from the main power supply. Insert a standard flat head screw driver in to the fuse holder housing, located on the back of the unit. Turn the screwdriver in counter-clockwise direction to remove the fuse holder. Remove the old fuse and discard it, replace the fuse with the same type. Insert the fuse back into it’s housing.
PAGE 6
FS600LED Warranty MANUFACTURER’S LIMITED WARRANTY A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories.